Plumbing problems are a headache for homeowners. From a dripping faucet to a blocked drain or a running toilet, such problems may interfere with your daily life. Fortunately, most of the common professional plumbing service in phoenix problems have simple solutions. In this article, we will discuss some common plumbing issues and how you can approach them correctly.
Leaky Faucets
Problem:
A dripping faucet no longer only annoys you with its constant sound but it also wastes water. After some time, this can lead to higher water bills.
Solution:
The first thing you should do is turn the supply of water off underneath the sink. Then, take the handle off of the faucet. You may also need a screwdriver or an Allen wrench depending on the type of your faucet. Once you have access to it, examine the washing machine or O-ring. If this looks worn or damaged, replace it. Reassemble the faucet and turn the water supply back on. If leak continues could have to replace entire faucet.
Clogged Drains
Problem:
Clogged drains can build up undesirable odors and sluggish water waft. Kitchen sinks commonly clog due to grease, meals particles, and soap scum. Bathroom sinks may also clog from hair and cleaning soap.
Solution:
Begin by using a plunger. Be sure that there is enough water in the sink to cover the plunger. Use force in pressing down and then pulling up. Do this about 30 seconds. If that doesn‘t work, mix baking soda and vinegar. Place a half-cup of baking soda into the drain, followed by 1/2 cup of vinegar. Immediately cover the drain and let it sit for 30 minutes. Then flush it out with hot water. If those don’t work, a plumbing snake can help cut up fussy clogs.
Running Toilets
Problem:
A running toilet is one that cannot stop running and wastes great amounts of water; this can raise your water bill astronomically. It usually occurs from either a faulty flapper or damaged fill valve.
Solution:
Lift the lid of the bathroom tank, and at the bottom, inspect the flapper valve. Replace it in case of wear out. To attach the flapper to the handle, ensure that the chain is neither too slack nor too tight. If the flapper looks fine, inspect the fill valve. Lower or raise the float to allow the water to stop at the right level. If this valve is damaged, you may need to replace the entire thing.
Low Water Pressure
Problem:
Low water pressure can make showering and washing dishes annoying. This nuisance may stand up from a variety of causes, including mineral buildup or leaks.
Solution:
First, inspect to see whether the low pressure is occurring in only one faucet or at some point in the house. If it‘s localized, remove the aerator–the screen on the end of the faucet–and clean it. One of the major reasons for an aerator clogging up is mineral buildup. If the low pressure is affecting the entire house, you should check the exposed pipes for leaks. A loss of water pressure can also be a symptom of an issue with the main water line; in which case, you will probably want to call in a professional as well.
Water Heater Issues
Problem:
If you are not receiving any hot water, then there could be a problem with your water heater. In this case, the thermostat might be defective, there may be a buildup of sediment, or even a heating element that has been damaged.
Solution:
First, check your thermostat on your water heater. If it‘s set too low, adjust it to about a hundred and twenty ranges Fahrenheit. If that doesn‘t paint, turn off the power and inspect the heating factors for harm. If you have got a tank water heater, flushing it once a year can save you sediment from building up. If you don’t want to tackle the process yourself, call a plumber.
Overflowing Toilets
Problem:
A flushing toilet can be unsanitary as well as distressing. This is generally due to a clogged drain or damaged glide.
Solution:
If the toilet is overflowing, quickly remove the tank lid and push down the flapper to stop the flow of water. Then, take a plunger into the bathroom to clear the clog. If plunging doesn‘t succeed in solving the problem, try using a toilet auger. If the problem isn’t fixed with those two methods, you will probably want to call a 24/7 emergency plumbing servicein phoenix because the clog is deeper in the line.
Pipe Leaks
Problem:
Leaky pipes can be a source of water damage and mold growth. They occur mainly in older houses or due to frozen pipes in wintry weather conditions.
Solution:
Find the leak and shut off the water supply to that area. For small leaks, one could use plumber‘s tape or epoxy putty for a temporary fix. If the leak were larger, one would want to consider replacing the section of pipe in question. If one is not sure how to operate, it is best to call a professional plumber.
Conclusion
Handling plumbing issues does not need to be intimidating. By learning about those common issues and how you can resolve them yourself, you will save money and time. Remember that always some problems require the touch of a professional. Regular remodeling and inspection will also save you a lot of plumbing problems from coming up. Just stay proactive, and your plumbing system will serve you nicely for many years to come!